Working
center - automatic PEDRO
Floor-type
vertical spindle machining center controlled by CNC, able to
work on extruded aluminium, light alloys, PVC and iron working
on 3 sides. Tilting working table managed by CNC: -90°/0°/+90°
with intermediate angles. The machine is fitted with an electric-spindle
4Kw, 18000rpm managed by inverter and quick change of the tool
with spindle ISO30. Interpolation X, Y, Z and W axes managed
by numerical control. Brushless motors for X, Y, Z and W positioning.
Performances and tilting of the working table in complete safety
by the enclosed protection. Complete with 4 pneumatic double
action clamps, tool diameter correction by software. Axis mouvements
on linear guides. Left profile stop. Milling dimensions: X=3000mm,
Y=400mm, Z=300mm.
STANDARD
EQUIPMENT
• Machine managed by Industrial PC with dedicated software
program
• Simplified interface on Windows basis
• Adjustement speed axes
• Automatic change of the tools at 7 lodging
• Possibility to machine pieces longer than the frame’s
length
• 1x Spindle ISO 30
• 1x Tooling unit Ø8mm
• 1x Collet Ø8mm
• Pneumatic spray mist lubrication
• 3x compartments to collect swarfs
• Air Filter
• Air Gun with spiral hose
OPTIONAL
• Micro-drop lubrication system with pure oil
• Collect chuck ISO30
• Additional clamps
• Spring collect ER32 Ø3–16mm
• Raising stop rightside
• Bar code reading device
• Thread compensator with quick change tap adapter
• For side spindle milling enter
• Milling cutter max diam. 140X6mm
• Uninterruptable power unit (220V, 50Hz, 250VA)
|